Automobile Electrical Industry Equipments India Kolkata | Filament Winding Manufacturer | Contact Compression Moulding Works

Call : +91 33 2553 2653 | Mail : fibrodkn@fibroplastichem.com

Hydrualically Efficient & Corrosion Resistance Piping Sytems

Fighting corrosion with GRP Piping

Above and below the ground , on the land and at sea, there are all manner of structures and equipments that have to survive in corrosive enviroments .Water, Chemcials, Gases and Salt can all take their toll on traditional materials.

Glass reinforced plastic(GRP) piping is the material of choice for handling corrosive fuilds and is especially suitable in coroosive external conditions, typically caused by corrosive soils, saline water or by Chemical fumes. FIBROGLAS filament-wound GRP piping systems are custom engineered custom fabricated for the particular corrosive enviroment, mechanical and thermal loading.

By tailoring these parameters, a more reliable and longer pipe-life is achieved due to superior properties, higher design factore and higher corrosion resistance.

By custom designing the pipe laminate, superior axial strength and stiffness can be achieved. This can be used to advantage to increase support span thus reducing costs associated with pipe supports.GRP pipes are also designed to be more tolerant of the localized stresses caused by pipe supports This is accomplished by the design of the laminate and by the addition of special reinforcements in support regions

Stiffeners are often a very cost effective way to handle load conditions which cuase the pipes to buckle and collapse. Examples are vacuum loading, soil loading and traffice loading.The stiffener. Laminate the stiffener spacing are all 'fine tuned' for the most efficient and cost effective design.

electrical industry equipments manufacturer kolkata

industry equipments manufacturer kolkata

Longevity
FIBROGLAS GRP pipes are designed for a mininmum life time of 50 years, in accordance with present standards of GRP pipes.

Freedom from maintenance
Based on extremely good corrosion resistance FIBROGLAS GRP pipes do not need periodic maintenance or cathodic protection from below ground installations

No Leaks
FIBROGLAS GRP pipes are delivered in standard lengths of 6 Mtrs. and 12 Mtrs., hence fewer joints than in pipes made from traditional materials. Fewer joint means, less chance of any problems arising out of leakage.

Light Weight and Easy insatllation
The light weight (1/5th the weight of steel pipes) and long sections of FIBROGLAS GRP pipes considerably reduces installation cost, while fewer joints and feadibility of rapid field fabrication leads to faster installation.

Best Long Term Cost/performance Relationship
FIBROGLAS GRP pipes are not always the cheapest alternative based on the initial piping cost, but considering over all installation, long term maintenance savings, corrosion resistence and the toal life time, GRP piping offers the best / performance relationship.

Salient Features

High corrosion resistance
High strength-to-weight ratio
Excellent dimensional stability
High insulating properties
Light weight
Easy Installation
Lesser number of joints
Minimum slime build-up
Low maintenance cost

APPLICATIONS

Process piping
Chemical plants, paper & pulp, oil & gas, Metal industries (IFerrous & non-ferrous), Desalination plants, Mines etc.

Power Plant Piping
Seawater / Brackish & Sweet water Intake, Cooling & DM Water Lines, Coal Dust Suppression, Utility LInes etc.

Marine & Off- shore Piping
Ship-board & off-shore Platform-Ballast Lines, Fire Fighting Lines, Utility Lines.

Potable Water, Sewage & Industrial Effluents Piping
Raw Water Intake, Over ground/ under ground Cross Country Piping.

INSTALLATION & JOINING METHODS

Mechancial Joints
Flanged Joints
Adhesive Joints

Design Codes & Standard

ANSI / AWWA C-950	: For GRP pressure pipes
ASTM D2996	: For filament wound GRP pressure pipes
ASTM D3517	: For GRP pressure pipes
ASTM D3754	: For GRP Sewer & Industrial pressure pipes
ASTM D2323-72	: For installation of buried GRP pipes
ASTM D4161	: For GRP pipe joints using flexible elastomeric seal
BS 7159-89	: Design & Construction of GRP piping system for industrial plants or sites

Availability

Diameter:	: 25 mm to 4000 mm
Lengths	: 6 meters to 12 meters
Pressure rating	: 6 bar(0.6 Mpa) to 30 bar (3 Mpa)
Reinforcement	: Unidirectional glass fibre Rovings
Resin Matrix	Polyester, Epoxy, Vinyl ester and Phenolic .